Manual Tube Bender RDB-100

The RDB-100 manual tube bender is perfect for the industrial fabricator that needs to bend lower production runs with very professional looking bends. This manual tube bender is constructed of steel plate and ships mostly assembled with only the handle and stand needing to be attached. Like all top mounted tube benders from Baileigh Industrial, the RDB-100 was made to accept hundreds of round and square tubing die sets as well as round pipe dies sets.

The RDB-100 tube bender form Baileigh Industrial uses a large diameter indexing plate that allows the operator to bend up to 206 degrees (180 degrees plus spring back) without having to re-index and re-pin common on most other manual tube benders on the market. A tension spring back mechanism holds the position as the bend mechanism grabs the next tooth on the index wheel. When requirements are for lighter gauge materials the RDB-100 ratcheting bend system can be shut off and the handle can be put into a manual override housing that allows the operator to simply walk around the manual bender and bend without the power of the indexing unit.

The RDB-100 is very versatile and great for bending up to 1-3/4" OD tubing with a wall thickness of .095" and 1" schedule 40 pipe. The RDB-100 includes the stand, degree dial, and handle. A large degree dial displays your bend angle and all the tooling has a start of bend indicator line so complex bends can be made with ease. A quick release counter die system allows for quick loading and unloading of the material.

For more information on the RDB-100 or any of the other tube benders from Baileigh Industrial, please contact a customer service representative at 920-684-4990.

All specs are based of tensile strength of 60,000-66,000 PSI