Metal Machinery > Ironworkers and Punching > Hydraulic Ironworkers > SW-95

Hydraulic Ironworker - SW-95

(Click Picture to Enlarge)

$28,095.00

Ironworker Machine

The SW-95 hydraulic ironworker has 95 tons of punching power and 123 tons of shearing and notching power. This is a dual operator machine where both areas can be operated independently at the same time with no loss of power to either work area. Like all Baileigh hydraulic ironworkers this is a true five station machine.

This hydraulic ironworker is constructed from heavy structural plate that is first bolted, then electro-welded in place for rigidity. All motions of the SW-95 operate using pure vertical movements and NO PIVOT, common on most other hydraulic ironworkers. Vertical movement with no linkages is less stressful on the machine, allowing the tooling to last longer by eliminating the harsh snap when punching.

The punching station has a deep 16" throat and comes standard with 7 sets of punches and a large scaled table. The table can be broken down to accept channel and angle iron. In the punching section it can be outfitted with the optional pipe notching and press brake tooling.
This hydraulic ironworker is outfitted with a hydraulic hold down system at the shearing station for plate, solids, and angle. An optional channel iron shear is available. To compliment the shearing section an automatic back gauge is available to assist with large production runs. Our shearing section does not produce an expensive slug of material waste common with some other brands.

Our hydraulic ironworkers notching section is great for working with solid plate and angle iron. This notching station can be outfitted with the optional vee notcher.

Baileigh keeps a large inventory of tooling in stock for same day shipments. This machine is typically in stock for quick deliveries. Please call your knowledgeable Baileigh representative for further information.

Imperial

Metric

Punching

Punching Pressure

95 Tons

85 Tons

Punch Capacity

1.062" x .875"

27 mm x 22 mm

(Diameter x Thickness)

2" x .5"

50 mm x 12 mm

Throat Depth

16"

410

Max Stroke Length

3.93"

100 mm

Cycles / Min

38 @ 15 mm

Working Height Up to Die

41.3"

1050 mm

Flat Shearing

Flat Bar Shearing

16" x .75"

406mm x 20 mm

(Width x Thickness)

Blade Length

16.125"

410 mm

Angle Flange Trim

100 mm

Working Height

28.5"

726 mm

Angle Shearing

At 90° Shearing

5.125" x 5.125" x .5"

130 mm x 130 mm x 12 mm

Working Height

40.9"

1040 mm

Bar Shearing

Round Bar Shear

1.75"

45 mm

Square Bar Shear

1.75" x 1.75"

45 mm x 45 mm

Working Height

Notching

Rect. Notcher(W x D x T)

2" x 3.5" x .5"

50mm x 90 mm x 12 mm

Working Height

41.3"

1050 mm

Special Tooling

Single Vee Press Brake (L x T)

9.875" x .625"*

250 mm x 15 mm*

Multi-Vee Press Brake (L x T)

19.625" x .187"*

500 mm x 5 mm*

Angle Bending*

4" x .312"*

102 mm x 8 mm*

Pipe Notching

4.4"*

114 mm*

Lg.Vee-Notcher (Side x Side x T)*

5.75" x 5.75" x .375*

145 mm x 145 mm x 10 mm*

Vee-Notcher (Side x Side x T)*

4.1" x 4.1" x .5"*

105 mm x 105 mm x 12 mm*

Channel Shear

I Beams Shear

Other

Electric Power (HP)

10 HP

Net Weight (Apr.)

6,050 lbs

2750 kg

Machine Dim. Apr. (L x W x H)

70.6" x 40.1" x 73.4"

1795 mm x 1020 mm x 1865 mm

* Optional Tooling - See your Baileigh Rep Based on material tensile strength of 65,000 PSI.Design subject to change without notice.